|
DIAMOND MESH
LATH WITH B/D/F PAPERS PLAIN OR SELF-FURRED (Tilath)
Available in plain or “V” rib embossed self-furred
diamond mesh lath and with the choice of : Grade B paper, a highly
water-resistant paper that offers very low vapor permeability;
Grade D paper, a moderately water-resistant, highly vapor permeable
paper; and Grade F paper, a fire retardant paper that is also
water-resistant. Grade D paper is available in 30 and 60-minute
versions and also in two ply applications. All paper meets federal
specification UU-B-790a.
|
Diamond Mesh Lath
Weight per Square Yard
|
|
|
Cal Spray Tilath
|
Plain or "V"
RibSelf-Furred
|
GradeB, GradeD, or
Grade F Paper
|
|
3.4 lbs.
|
Cal Spray Tilath
|
Plain or "V"
RibSelf-Furred
|
GradeB, GradeD, or
Grade F Paper
|
|
|
Cal Spray Tilath
|
"V" RibSelf-Furred
|
Self Furred paper
between ribs only
|
|
3.4 lbs.
|
Cal Spray Tilath
|
"V" RibSelf-Furred
|
Self Furred paper
between ribs only
|
CAL SPRAY
LATH (PLAIN OR SELF-FURRED)
Cal Spray Self-Furred Lath with its longitudinally
embossed self-furred ribs (aprox. ¼” high) Plain Kraft
paper is applied in strips between the ribs. The kraft paper serves
to conserve machine applied stucco and allows for visual location
of studs during installation. This product is intended for applications
not requiring a water resistant barrier.
AMICO Diamond Mesh Self-Furred “V” Groove Lath
AMICO self-furred lath does not require additional
self-furring mechanisms to function as required by ASTM C1063.
Available in nomnal sheet size 27” x 97”. Packed 10
pcs per bundle and 25 bundles per pallet.
CAL
SPRAY FLAT RIB LATH
(1/8
INCH FLAT RIB)
This is a more rigid lath product than diamond mesh
lath, and like Cal Lath has strips of kraft paper attached between
the ribs. The added rigidity makes this product well suited for
horizontal applications such as soffits. The paper helps reduce
the amount of plaster waste and is not intended to be moisture
resistant.
|
Weight Per Square Yard
Cal Spray Rib Lath
|
|
2.75 lbs.
|
Flat Rib Lath
|
Galvanized
|
|
3.4 lbs..
|
Flat Rib Lath
|
Galvanized
|
|
3.4 lbs.
|
High Rib Lath
|
Galvanized
|
CAL SPRAY
HIGH RIB LATH
(3/8 INCH HIGH RIB)
This rib lath has kraft paper between the ribs. The
higher ribs (3/8”) allow this lath to span greater horizontal
spans. Note: 48” length available by special order.
Nominal sheet size for Cal Spray products 27” x 48”
or 97”
Packaging: 10 pcs. (20 square yards) per bundle-
50 bundles (1000 square yards) per pallet. All lath products are
produced from hot dipped galvanized steel per ASTM A653, A924
and C847.
Note: lath products on this page are manufactured only at
the AMICO Fontana, CA facility.
|
